7.3.2
Selected units: litres,
cups, jugs or US gallon
The machine is default set to the unit L (= litres).
This unit can be changed. (This unit is default on
the display with the preference keys (fig.23 )).
− A selection can be made from the following
units: Litre = L, Gallon = GL (3.7853 L), Jug,
or Cup (fig.21 ).
− The selected is also used for further settings,
except with the total counters.
G
H
I
J
K
L
M
Fig. 21 Units to be selected
D Press programming key (I.).
− The L of litres starts flashing on the display.
− This is the default setting (fig.22 ).
D Press the selection key (M.)⇓ or (N.)⇑ until the
symbol for the desired unit flashes on the
display: cup, jug, GL (= US Gallon) or
L (= litre).
− The enter symbol ↵ appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
− The symbol for the desired unit stops
flashing and the other symbols disappear.
G
H
I
J
K
L
M
Fig. 22 The default set unit = L (litres)
22
version
1.0
D Selected unit:
7.3.2.1
G
H
I
J
Fig. 23 Default pre−selection keys
D Press selection key (N.)⇑, until fig.23 appears
N
D Press the pre−selectionkey to be changed (G.,
D Press selection key (M.)⇓ or (N.)⇑ to select the
D Press the confirmation key (L.) to confirm the
D Press selection key (N.)⇑ to go to the next
Model
B5
B10
B20
B40
Table 4 Default settings
N
litre , go to § 7.3.2.1
tap, go to § 7.3.3
jug, go to § 7.3.4
US gallon, go to § 7.3.5.
Changing pre−programmed
selection keys G−J (Litres)
K
L
M
on the display.
− The default pre−selectionof keys (G.−J.) can
now be adjusted.
H., I. or J.).
desired amount (table 4 ).
− The enter symbol ↵ appears on the display.
− Repeat these two previous steps to change
other pre−selectionkeys if necessary.
adjustment.
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
Factory setting
pre−programmed
selection keys
1−3−4−5 litres
2,5−5−7,5−10 litres
5−10−15−20 litres
10−20−30−40 litres
ECopyright Bravilor Bonamat B.V.
N
Setting range
1−5 litres
2−10 litres
4−20 litres
8−40 litres