BRAVILOR BONAMAT B5 Mode D'emploi page 87

7.3.3 Cup contents
The contents of a cup can be set, as not all cups
are of the same size.
− The setting range is between 50 and 200ml
and can be adjusted by steps of 5ml.
− The default setting for a cup is 125ml.
G
H
I
J
M
K L
Fig. 24 Cup contents
D Press selection key (N.)⇑ until fig.24 appears
on the display.
D Press programming key (J.).
− The position beside the programming key
starts flashing.
D Press selection key (M.)⇓ or (N.)⇑ to select the
desired amount.
− The enter symbol ↵ appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
ECopyright Bravilor Bonamat B.V.
7.3.3.1
The machine calculates itself the number of cups
of the default pre−selectionkeys, in relation to the
preferred settings of litres divided by the content
of the cup. These default pre−selectionkeys can
be adjusted as desired.
G
H
I
J
N
Fig. 25 Adjusting pre−programmed selection keys
D Press selection key (N.)⇑ until fig.25 appears
D Press the pre−selectionkey to be changed (G.,
D Press selection key (M.)⇓ or (N.)⇑ to select the
D Press confirmation key (L.) to confirm the
D Press selection key (N.)⇑ to go to the next
Model
B5
B10
B20
B40
Table 5 Default pre−selection keys for cups
Adjusting pre−programmed
selection keys G−J (Cups)
M
K L
for cups
on the display.
− The default pre−selectionof keys (G.−J.) can
now be adjusted.
H., I. or J.).
desired amount (table 5 ).
− The enter symbol ↵ appears on the display.
− Repeat these two previous steps to change
other pre−selectionkeys if necessary.
− When cup contents other than 125ml have
been selected, the values of the
pre−selectionkeys will also differ from the
values given in table 5 .
adjustment.
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
Factory setting
pre−programmed
selection keys
8, 24, 32, 40 cups
20, 40, 60, 80 cups
40, 80, 120, 160 cups
80, 160, 240, 320 cups
N
Setting range cup)
8−40 cups
20−80 cups
40−160 cups
80−320 cups
23
version 1.0