Publicité
For packaging reasons, this machine is not fully assembled. The parts to be
General
Keep the package closed until installation and observe the installation and storage
markings on the outside.
Risk of device damage! The bag with accessories is located under the fuel
tank, between the tank and the engine. Remove the bag before using the
appliance. During transport, the assembly bag may have slipped out of place
or the bag may not be immediately visible under the fuel tank due to its black
color.
Risk of device damage! Remove the bag before using the appliance. The
mounting bag may have slipped during transportation.
Risk of crushing the upper and lower limbs. The appliance has a high dead
weight. Wear safety footwear and protective gloves.
Set up the device
• Place the appliance on a level, non-flammable, clean and fuel-resistant surface.
• Place the appliance at a minimum distance of three meters from walls, open windows
and doors.
Mounting rubber feet
• Have a second person lift the appliance slightly on the side of the exhaust (rear).
• Fit a small rubber foot to the lower rear bracket of the appliance, see Fig. 5.
• Loosely screw on the corresponding nuts.
• Tighten all screw connections.
• Repeat the process for the remaining rubber feet.
EN
V. 1.2
Assembly
assembled are included in the packaging.
17
Publicité
