Hisense HER30 Série Guide De L'utilisateur page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Hand clean inside door edge and the 1½" (3.8 cm) area around the inside oven
cavity frame, being certain not to move or bend the gasket. This area does not
get hot enough during self-cleaning to remove soil. Do not let water, cleaner,
etc., enter slots on door frame. Use a damp cloth to clean this area.
Wipe out any loose soil to reduce smoke and avoid damage. At high
temperatures, foods react with porcelain. Staining, etching, pitting or faint white
spots can result. This will not affect cooking performance.
To Self-Clean:
NOTE: The oven is preset for a 2 hour Cleaning cycle; However, the Cleaning time
can be adjusted. Suggested cleaning times are:
2 Hours - Light soil
3.0 Hours - Average soil
3.5 Hours - Heavy soil
1. Close the oven door.
NOTE: If an oven door is left open, "Door Open Clean Canceled" will appear in
the display and a tone will sound.
2. Press SELF CLEAN. "Remove Racks" will scroll in the selected oven text area for
5 seconds, followed by "Select Option."
"Select Level" and "Press 1. Level 1 (Quick) 2. Level 2, 3. Level 3, 4. Level 4 (reg),
5. Level 5, 6. Level 6 (Maxi)" will show on in the display text area.
3. Enter the desired Clean level by pressing the number keypad, and then press
START.
NOTE: The oven door will lock. "Oven is cleaning" will show on the display panel
until the clean cycle is finished. The lock icon appears on the top right beside
the time
When the self-clean cycle ends:
"COMPLETE" appears in the display and the oven door unlocks.
4. Open the oven door. Once the oven has completely cooled, remove ash with a
damp cloth.
NOTE: To avoid breaking the glass, do not apply a cool, damp cloth to the inner
door glass before it has cooled completely.
To Delay Start Self-Clean:
1. Press Delay Start.
2. "--:--" will be displayed, and "Set time to delay. Then Press START" will scroll
from right to left in the selected oven text area. Enter the time-of-day that you
want oven cleaning to begin, by pressing the number keypad.
3. Press START. "Select cooking/cleaning mode" will scroll in the selected oven
text area.
4. Press SELF CLEAN. "Remove Racks" will scroll in the selected oven text area for
5 seconds, followed by "Select Option."
5. "Select Level" and "Press 1. Level 1 (Quick) 2. Level 2, 3. Level 3, 4. Level 4 (reg),
5. Level 5, 6. Level 6 (Maxi)" will scroll in the display text area.
6. Enter the desired Clean level by pressing the corresponding number on the
keypad.
7. Press START. The cleaning cycle will begin when the Delay Start is reached.
36

Publicité

Chapitres

Table des Matières
loading

Table des Matières