Before Use - Hisense HER30 Série Guide De L'utilisateur

•
Make sure the bottoms of pots and pans are clean and dry before using them.
Residue and water can leave deposits when heated.
•
Avoid storing jars or cans above the cooktop. Dropping a heavy or hard object
onto the cooktop could crack the cooktop.
•
To avoid damage to the cooktop, do not leave a hot lid on the cooktop. As the
cooktop cools, air can become trapped between the lid and the cooktop, and the
ceramic glass could break when the lid is removed.
•
For foods containing sugar in any form, clean up all spills as soon as possible. If
sugary spills are allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
•
Allow the cooktop to cool down slightly.
•
While wearing oven mitts, remove the spill using a scraper while the surface
is still warm.
•
To avoid scratches, do not slide cookware or bakeware across the cooktop.
Aluminum or copper bottoms and rough finishes on cookware or bakeware could
leave scratches or marks on the cooktop.
•
Do not cook popcorn in prepackaged aluminum containers on the cooktop. They
could leave aluminum marks that cannot be removed completely.
•
To avoid damage to the cooktop, do not allow objects that could melt, such as
plastic or aluminum foil, to touch any part of the entire cooktop.
•
To avoid damage to the cooktop, do not use the cooktop as a cutting board.
•
To avoid damage to the cooktop, do not cook foods directly on the cooktop.

BEFORE USE

1. If present, remove all packing and literature from the cooktop surface.
2. Clean your glass top. A thorough cleaning with a glass top cleaner is
recommended. It only takes a minute and puts a clean, shiny coating on the glass
top before its initial use.
3. Place a saucepan of water on each of the front burners and turn them on HI heat
for at least 30 minutes. Turn off the front burners.
4. Place a saucepan of water on each of the rear burners and turn them on HI heat
for at least 30 minutes. Turn off the rear burners.
NOTES:
•
This procedure evaporates any protective oils and humidity collected
during the manufacturing process, and enables the electronic control
circuits to operate properly.
•
There may be a slight odour during the first several uses: this is normal and
will dissipate.
•
The cooking surface will hold the heat and remain hot over 20 minutes after
the elements have been turned off.
14