Replacing An Oven Light - Hisense HER30 Série Guide De L'utilisateur

5. Continue to push the top of the door closed, while pulling the bottom of the door
out of the hinge receivers in the door frame.
To replace the oven door:
1. Insert both hanger arms into the hinge receivers in the door frame.
2. Slowly open the oven door, and you will feel the door set into place.
3. Move the hinge latches back into the locked position.
4. Check that the door opens and closes freely. If it does not, repeat the door
removal and replacement procedures.

REPLACING AN OVEN LIGHT

Make sure the oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses serve to
protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
The oven light is a standard 25 watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the oven is cool and the controls
are turned off.
38
WARNING
Electrical Shock Hazard