Convection Conversion - Hisense HER30 Série Guide De L'utilisateur

To Set Convection Roast:
1. Place the food in the oven and close the oven door.
2. Press CONVECTION ROAST once. "Set Temp or Press Start", and 325°F (163°C)
will be displayed.
3. Press START, if you wish to convection roast at 325°F (163°C).
OR
Enter the desired temperature by pressing the number keypad, and then press
START. The temperature can be set from 170°F (77°C) to 500°F (260°C).
NOTES:
•
To change the set temperature during cooking, press CANCEL. Press the
number keypad to enter the desired temperature, and then press START.
•
After selecting an Oven Mode and Temperature, you have the option to
set a Cook Time and Delay Start before pressing START. See "Cook Time"
and "Delay Start."
4. Press START. After pressing START, the oven will display "CONVECT ROAST"
while cooking.
5. Press CANCEL when finished, and then remove food from the oven.
NOTE: If you used Cook Time or Delay Start to set a cook time, the oven will
turn off automatically.

CONVECTION CONVERSION

When using a Convection Recipe, enter your normal cooking temperature and time.
The Convection Conversion mode will adjust the temperature and time for perfect
cooking results. Example: entering 350°F for 15 minutes may adjust to 325°F for 12
minutes. Set Cook Time is mandatory for the Convection Conversion oven mode.
IMPORTANT:
•
The oven door must be closed before selecting a Convection Conversion oven
mode.
•
Setting Cook Time is required for a Convection Conversion oven mode. If Cook
Time was not set, the control will prompt you to Set Cook Time. See "Cook
Time."
NOTE: At the end of the set Cook Time, the oven will turn off automatically, the
end of cycle tone will sound and "Cooking Complete" will appear in the display.
BAKED GOODS
1. Press BAKED GOODS among the Convection Conversion controls.
2. Set the oven temperature.
NOTE: The temperature can be set from 170°F (77°C) to 500°F (260°C).
3. Press COOK TIME and enter time.
4. Press the number keypad to enter the desired cook time. "Press START" will
appear in the display.
NOTE: If a delayed start time is desired
press the number keypad to enter the desired start time. "Press START"
will appear in the display.
DELAY START, and then
, press
31