Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
5.5 Relay configuration page
The "Relay Configuration" page is divided into two parts.
The first part is used to select the relay function:
- Alarm: this is used to connect the relay (for example, for reporting of an alarm by an external
system).
- Lighting schedule: this is used to schedule up to two lighting periods per day for the clock.
To do this, check "Enable" then enter the times.
To optimise the start time and duration of lighting according to the two solstices of a year (light
conditions), check "Astro".
The second part is used to set the times corresponding to sunrise and sunset for the summer and
winter solstices.
By default, the correct values are entered for the northern hemisphere.
The Save buttons are used to save any settings entered on this page.
47
Publicité
Table des Matières
