Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Presentation of the web server
There are two ways to access the web interface to configure the clock:
1/ Open a web browser page, then enter your clock's IP address in the address bar.
2/ Use the "Bodet Detect" software, then click on the "Web browser access" button to open the
web server (please refer to the software manual 607548).
Bodet Detect software can be used to:
- detect clocks present on the network,
- configure each clock (individually or by copying the settings for one clock to a group of
clocks),
- update the clock's software version,
- check clock status,
- give access to the download of MIB files.
5.1 Home page
The clock web server home page contains general information about the clock.
The information is displayed as follows:
- Product : product type + SF (Single Face) or DF (Double Face) + SUP (Advanced Supervision)
or SUPb (Basic Supervision).
- Name : user-defined clock name.
- Synchro: synchronisation status (Strat 3 indicates that the clock is at the third "level" from the
synchronisation source) + IP address of the server on which the clock is synchronised.
e.g.
Strat 0
GPS antenna
Local Date: current date
Local Time: current time
42
Strat 1
Master clock
EN
Strat 2
Profil 960
Publicité
Table des Matières
