Publicité
15 Storing
14.3
Transporting the Charger
► Disconnect the plug from the wall outlet.
► Remove the battery.
► Wind up the connecting cable and attach it to
the charger.
► Transporting the charger in a vehicle: Secure
the charger with lashing straps, belts or a net
to prevent it turning over and moving.
15 Storing
15.1
Storing the chainsaw
► Switch off the chainsaw, engage the chain
brake and remove the battery.
► Push the chain scabbard over the guide bar so
that it completely covers the guide bar.
► Comply with the following conditions when
storing the chainsaw:
– The chainsaw cannot tip over or move.
– The chainsaw is out of reach of children.
– The chainsaw is clean and dry.
► If the chainsaw is stored for longer than 30
days: Remove the guide bar and saw chain.
15.2
Storing the Battery
STIHL recommends keeping the battery in a
charging state between 40% and 60 % (2 green
LEDs lit).
► The battery should be stored in such a way
that the following conditions are fulfilled:
– The battery is out of the reach of children.
– The battery is clean and dry.
– The battery is in an enclosed space.
– Keep the battery separate from the chain‐
saw.
– If the battery is stored in the charger, dis‐
connect the mains plug and store the bat‐
tery at a state of charge between 40% and
60% (2 lit green LEDs).
– Do not store the battery outside of the
specified temperature limits,
NOTICE
■ If the battery is not stored as described in this
User Manual, the battery may become deeply
discharged and irreparably damaged.
► Charge a discharged battery before storing
it. STIHL recommends keeping the battery
state of charge between 40% and 60% (2 lit
green LEDs).
► Store the battery separately from the chain‐
saw.
0458-023-9601-A
15.3
► Disconnect the mains plug from the power
supply.
1
► Wind up the connecting cable and attach it to
the charger.
► Observe the following points when storing the
charger:
– Charger is out of the reach of children.
– The charger is clean and dry.
– Charger is in an enclosed space.
– The charger is not suspended from the con‐
– Do not store the charger outside of the
16 Cleaning
16.1
► switch off chain saw, engage chain brake and
remove battery
► Clean the chainsaw with a damp cloth or
STIHL resin solvent.
► Clean vents with a paintbrush.
► Remove the chain sprocket cover.
► Clean the area around the chain sprocket with
a damp cloth or STIHL resin solvent.
► Remove foreign objects from the battery com‐
partment and clean the battery compartment
with a damp cloth.
► Clean the electrical contacts in the battery
20.7.
compartment with a paintbrush or soft brush.
► Fit the chain sprocket cover.
16.2
► Switch off the chain saw, engage the chain
brake and remove the battery.
► Remove the bar and chain.
Storing the Charger
necting cable or the holder (3) for the con‐
necting cable.
specified temperature limits,
Cleaning the chainsaw
Cleaning the Bar and Chain
English
2
3
20.7.
59
Publicité
