Publicité
21 Bar and Chain Combinations
20.9
Sound and vibration values
The K-value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). The K value for the vibration level is
2 m/s².
MSA 80.0 C
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 62841‑4‑1: 85 dB(A)
– Sound power level L
EN 62841-4-1: 93 dB(A)
– Vibration level a
measured according to
hv
EN 62841-4-1:
– Control handle: 3.9 m/s²
– Handlebar: 4.6 m/s².
The sound and vibration values indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
21 Bar and Chain Combinations
21.1
STIHL MSA 80.0 C Chainsaw
Pitch
Drive link
gauge/groove
width
1/4" P
1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
22 Spare Parts and Accesso‐
ries
22.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
0458-023-9601-A
measured according
pA
measured according to
wA
Length
Guide bar
25 cm
Rolloma‐
30 cm
tic E Mini /
Light 01
35 cm
30 cm
Carving
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
load. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
tool is switched off and also when it is switched
on but running without any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
20.10 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of
Number of
teeth, spro‐
drive links
cket nose
8
-
23 Disposal
23.1
Disposal of Chain Saw, Battery
and Charger
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
24 EC Declaration of Con‐
formity
24.1
STIHL MSA 80.0 C Chainsaw
ANDREAS STIHL AG & Co. KG
English
Saw chain
56
64
71 PM3 (model
3670)
72
64
63
Publicité
