Publicité
English
9 Adjusting wheel
The adjusting wheel is used to adjust the
chain tension.
10 Wing nut
The wing nut fastens the sprocket cover to
the chainsaw.
11 Chain catcher
The chain catcher catches the saw chain if it
breaks or comes off the bar.
12 Control handle
The control handle is used to control, hold
and guide the chainsaw.
13 Ergo lever
The ergo lever holds the locking button in
position when the trigger is released.
14 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
15 Battery compartment
The battery compartment holds the battery.
16 Handlebar
The handlebar is used to hold, control and
carry the chainsaw.
17 Oil tank cap
The oil tank cap closes the oil tank.
18 Locking button
The locking button unlocks the trigger.
19 Trigger
The trigger turns the chainsaw on and off.
20 Battery
The battery supplies the chainsaw with
power.
21 LEDs
The LEDs indicate the state of charge of the
battery and any errors.
22 Button
The pushbutton activates the LEDs on the
battery.
23 Charger
The charger charges the battery.
24 LED
The LED indicates the status of the charger.
25 Connecting cable
The connecting cable connects the charger to
the mains plug.
26 Mains plug
The mains plug connects the connecting
cable with a socket.
38
27 Chain scabbard
The chain scabbard protects against contact
with the saw chain.
# Rating plate with serial number
3.2
Symbols
Meanings of symbols that may be on the chain‐
saw, battery and charger:
This symbol shows the direction of
rotation of the chain.
Turn in this direction to tension the saw
chain.
This symbol marks the chain oil tank.
The chain brake is engaged in this direc‐
tion.
The chain brake is disengaged in this
direction.
1 LED glows red. Battery too hot or too
cold.
4 LEDs flash red. There is a malfunc‐
tion in the battery.
LED glows green and LEDs on battery
glow or flash green. Battery is being
charged.
LED flashes red. No electrical contact
between battery and charger or mal‐
function in battery or charger.
Length of guide bar that may be used.
Guaranteed sound power level accord‐
L
ing to directive 2000/14/EC in dB(A) in
WA
order to make sound emissions of
products comparable.
The data next to this symbol indicates the
energy content of the battery according to
the cell manufacturer's specification. The
energy content available during operation
is lower.
Operate the electric appliance in a dry
place, indoors only.
Do not dispose of the product with your
household waste.
4
Safety Precautions
4.1
Warning symbols
Meanings of warning signs and labels on the
saw, battery or charger:
4 Safety Precautions
0458-023-9601-A
Publicité
