Publicité
6.
CLEANING
6.1
AUTOMATIC WASH CYCLE:
This function serves to carry out an auto-
matic wash cycle for the groups.
NOTE: It is possible to open the wash func-
tion by pressing the wash button
.
Insert the blind filter in the filter holder,
add half a dose of Pulicaff and insert the
filter holder into the group to be cleaned
automatically
Use the rotary switch to select the group
to be washed and press the switch:
Automatic wash. Cycle
Select group
1
2
3
The machine views:
Automatic wash. Cycle
Select group
1
2
3
Washing
The cycle will start automatically for the group.
It is possible to select one of the other
groups.
At the end, select
or
Menu
In this case, the screen will display (E.g.
Wash group 1 only):
°C
W
1.20 bar
Once the washing has been finished, the
rinse stage is requested automatically:
The washing button
flash; press it and the machine will display:
Menu Principale
1
Rinse
Empty the blind filter of any Pulicaff resi-
dues and re-insert the filter holder into
Menu Principale
the group.
Press the rotary switch on the group to be
rinsed, then select
°C
R
1.20 bar
to exit.
Home
Sunday
19 March
Menu Principale
14:45
°C
°C
Menu
will start to
Automatic wash. Cycle
Menu Principale
Select group
2
3
the screen will show:
Home
Sunday
19 March
Menu Principale
14:45
°C
°C
Menu
NOTE: During the selected group wash
cycle, it is possible to deliver coffee
from the groups that have not
been selected.
6.2
STOP
Stop the machine with the three main
switches, moving them to the position 0.
6.3
CLEANING THE OUTSIDE
OF THE MACHINE
The machine must be set to "O" power
(switch off and disconnector open)
before any cleaning operations are per-
formed.
WARNING
It is not possible to clean the machine using
water jets or standing it in water
WARNING
Do not use solvents, chlorine-based prod-
ucts or abrasives.
Cleaning the work area: remove the
worktop, lifting it up from the front and
sliding it out. Remove the water collec-
tion dish underneath and clean every-
thing with hot water and cleansers.
Cleaning the bottom: To clean all the
chromium-plated areas, use a soft, damp
cloth.
Fig. 16
67
Publicité
