Publicité
USB FUNCTIONS
:
This screen is used to update the firmware
inside the machine.
Follow the procedures described on the
display and use the special USB socket in
the control panel.
MAINTENANCE
:
This function serves to set scheduled
maintenance.
It is possible to programme the number
of deliveries and the date after which the
maintenance alarm will be enabled.
The alarm is triggered when the hour
counter or date is reached.
The machine will continue to operate as normal.
Select the icon with the rotary switch and
press it. The number of deliveries will
start to flash.
Number
of deliveries
12000
31
December 2018
Maintenance
Change the number of deliveries with the
rotary switch and press to confirm.
Use the same method to change the day,
month and year for the maintenance
date.
Once having carried out the modifica-
tions, reset the inner counter of the cycles
to make them effective.
Keep the washing key pressed
seconds to reset the inner counter. A mes-
sage relative to the counter zeroing will
be displayed.
PASSWORD SETTINGS
This page is used to enter the login pass-
word, when it is required and enabled.
The password may consist of 4 numbers
from 0 to 9 in any combination.
Date and time
Password
setting
The password length may be included
between 0 (password disabled or invalid,
Menu Principale
characterized by horizontal lines) and 4
digits; therefore, even a password of 2
digits is valid.
Once having entered and confirmed the
password, an information page will show
the result of the comparison between the
entered password and the one previously
set.
for 5
:
Impostazioni tecniche
Technical settings
Menu Principale
Information
USB
Maintenance
functions
Pre-infusion
Settings
scales
Menu Principale
Insert new password
To enter the pages inside the various
menus, when the password is unknown,
the passe-partout password may be used.
The value of this password is 1 9 0 5.
Change of password
This page, which is contained in the tech-
nical settings menu, permits to change
the password.
It is necessary to first confirm the pass-
word set (for safety reasons), if the pass-
word management is enabled.
Once having entered and confirmed the
password, an information page will show
the result of the comparison between the
entered password and the one previously
set.
Insert old password
Subsequently, the new password to be
set will be requested.
Menu Principale
65
Publicité
