Publicité
ACTIVE STANDBY
:
This function allows the machine to enter
standby mode or not, which makes it pos-
sible to choose whether or not to switch
off the machine completely or to keep it at
a set pressure (less than working levels).
Use the rotary switch to select the follow-
ing options:
• OFF: during the OFF state, the machine
is completely switched off and the dis-
play reads "OFF".
• ON 0.10 bar: during the OFF state, the
machine maintains a pressure of 0.10
bar and the display (set to minimum
brightness)
reads
CONSUMPTION".
0.10 bar
62
• ON 0.50 bar: during the OFF state, the
machine maintains a pressure of 0.50
bar and the display (set to minimum
brightness) reads "LOW CONSUMPTION.
• ON 0.80 bar: during the OFF state, the
Menu Principale
Active standby
machine maintains a pressure of 0.80
bar and the display (set to minimum
brightness)
CONSUMPTION"
"LOW
Menu Principale
Active standby
Press the rotary switch to confirm the
required option.
This operation is used with both manual
switching on/off using the button
automatic switching on/off by program-
ming the machine.
If the on/off button
one of the three active standby states
(0.10 bar, 0.50 bar, 0.80 bar), the machine
will switch off completely.
If the button is pressed again, this will
switch on the machine.
POWER MANAGEMENT
This function serves to control the power
absorbed by the machine while it is heat-
ing up, in order to limit consumption.
Menu Principale
Active standby
If enabled at switch on, the use of the
steam boiler, groups and group boiler will
be split. The Power Management heating
system will stop as soon as the steam
boiler steam requirement drops to below
40% of maximum required power.
0.50 bar
At this point, the machine will resume
working as normal.
Use the dial to select
then press to confirm.
reads
"LOW
Menu Principale
Active standby
0.80 bar
NOTE: If the Power Management heating
, and
is pressed during
:
/
Power management
Menu Principale
is enabled, the "Home Page" will
show the following: "Eco warm-
up".
and
Publicité
