Publicité
5.2.6
DELIVERY COUNT
Use the rotary switch to move to the
"Delivery count" icon and press to open:
Dose
Temperature
Language
programming
setpoint
Energy
Pour
Alarms
saving
count
A screen will open to view the counters:
Delivery
Partial
Absolute
counters
counter
counter
Select the delivery counter icon
and press the rotary switch.
On the counter page, it is possible to view 2
tables that show the counters; to pass from
one to the other, use the rotary switch.
The first table shows the counts for the
single doses of each group:
5
0
0
0
0
0
0
0
Continue
1
0
The second table shows the total for groups,
washing, services and absolute total:
Total grp
Washes
Purge
Menu Principale
Main Menu
18
Key and display
settings
The purge value refers to the dispensa-
tions used for the purge operations of the
group. A delivery is considered a purge
Technical
settings
when it lasts less than 5 seconds.
The "maintenance" parameter refers to
the cycle counter useful for setting mainte-
nance alarms. The value could be reset
Menu Principale
Delivery Count
only by the technical service engineer.
Total grp
Washes
Total
18
The different fields in the two tables can
be deleted using the delete mode.
The delete mode is entered by pressing
and holding down the wash button
for a few seconds.
Once in this mode, the table will contain a
red rectangle showing the value that can
be deleted.
Menu Principale
Use the rotary switch to select the field to
3
be deleted and press the rotary switch
0
again to delete it.
0
To quit the delete mode, press the wash
0
0
button
0
To quit the count mode, press the rotary
switch again and then select
.
Home
Menu Principale
3
6
6
6
7
1
2
8
8
10
Maintenance
4
1
13999
Menu Principale
3
6
6
6
7
1
2
4
1
again.
or
Menu
5.2.7
ALARMS
Use the rotary switch to select "Alarms"
and press to open:
Dose
Temperature
Language
programming
setpoint
Energy
Pour
Alarms
saving
count
Two options will be displayed:
Alarms
washing
history
allarm
Icon
Description
Alarm history
Wash alarms
ALARM HISTORY
:
This function serves to view the history of
control unit alarms:
Error found
Cup warmer probe 1 error
Pressure error
Group dose error 1
Group dose error 2
Group dose error 1
Menu Principale
Menu Principale
Main Menu
Key and display
settings
Technical
settings
Menu Principale
Alarms
Menu Principale
63
Publicité
