Publicité
TRANSPORT AND HANDLING
MACHINE IDENTIFICATION
Always quote the machine serial number
in all communications to the manufac-
turer, Simonelli Group.
Since 1905
Mod.
VA388 T3 S GR2 C
S.N. XXXXXX
Date 09 / 03 /2015
P = 7400 W
380 - 415 V3N
50 / 60 Hz
Cup Warmer
Operating Pressure 0,165 MPa
MAX Inlet Pressure 0,65 Mpa
TRANSPORT
The machine is transported on pallets
which also contain other machines - all
boxed and secured to the pallet with sup-
ports.
Before carrying out any transport or han-
dling operation, the operator must:
• put on work gloves and protective
footwear, as well as a set of overalls
which must be elasticated at the
wrists and ankles.
The pallet must be transported using a
suitable means for lifting (e.g., fork-
lift).
40
HANDLING
CAUTION
RISK OF IMPACT
OR CRASHING
Must ensure that there are no persons,
objects or property in the handling
area.
The pallet must be slowly raised to a
height of 30 cm (11,8 in) and moved to
the loading area. After first ensuring
that there are no persons, objects or
property, loading operations can be
carried out.
Upon arrival at the destination and
after ensuring that there are no per-
sons, objects or property in the unload-
ing area, the proper lifting equipment
(e.g. forklift) should be used to lower
the pallet to the ground and then to
move it (at approx. 30 cm (11,8 in)
from ground level), to the storage area.
CAUTION
RISK OF IMPACT
OR CRASHING
Before carrying out the following oper-
ation, the load must be checked to
ensure that it is in the correct position
and that, when the supports are cut, it
will not fall.
The operator, who must first put on
work gloves and protective footwear,
will proceed to cut the supports and to
storing the product. To carry out this
operation, the technical characteris-
tics of the product must be consulted
in order to know the weight of the
machine and to store it accordingly.
Publicité
