Cleaning and storage
Adhesive electrodes
To ensure long-lasting adhesiveness of the electrodes, carefully clean
them with a damp, lint-free cloth, or clean the bottom side of the
electrodes under lukewarm running water and dab dry with a lint
free cloth. When cleaning under water, disconnect the cables from the
electrodes first.
After use, reattach the electrodes to the carrier film.
Cleaning the device
Remove the batteries from the device before cleaning.
After use, clean the device with a soft, slightly damp cloth. To remove
stubborn staining, you may also moisten the cloth with a mild soapy
solution.
Do not use chemical cleaners or abrasive cleaners.
Make sure no water enters the device.
Reusing the device
The device is suitable for reuse after reprocessing. Reprocessing includes
replacing the electrodes and cleaning the surface with a cloth moistened
with a mild soapy solution.
Storage
Do not sharply bend the connection cables of the electrodes.
Disconnect the cables from the electrodes.
After use, reattach the electrodes to the carrier foil.
Store the device in a cool, ventilated place out of reach of children.
Do not place any heavy objects on the device.
Displaying battery status
The battery indicator light lights up when the capacity of the battery
decreases.
52