Publicité
Admin Mode
Info
Basic Setup
Pro Setup
Emergency Mode
Tool Settings
Work Settings
Load Setup
Un-/Lock
Service
3.5
MENU
3.5.1 Info
3.5.1.1 Counter
The total counter and service counter can be read at this point.
•
Total Counter: Number of fasteners set during the service life of the setting tool.
•
Service Counter: Number of fasteners until next service.
3.5.1.2 FW Version
The version and revision number of the currently installed firmware is stated.
3.5.2 Tool Settings
3.5.2.1 Language
The menu language can be set in this menu.
3.5.2.2 Sounds
The sounds for warnings and the keys can be activated or deactivated in this menu.
Warnings are always displayed via the status LED and the screen, regardless of these settings.
Language
Sounds
Times
PIN
Emergency ON/OFF
Setup
Counter
Spindle
FW Update
PWR Update
Reset
New
Adjust
Spindle Mode
Import File
Export File
English | 45
Publicité
