Publicité
Abbr. Description
L/K
Sound emissions LWA KWA// LPA /KPA [dB (A)] EN ISO3744
A/K
Vibrations ah / K [m/s2]
U
Battery [V]
A
Approved battery [Ah]
2.2
INTENDED USE
This machine is a battery-powered setting tool for inserting matching fasteners into components. Only
blind rivet nuts and bolts are to be used as fasteners with the setting tools described in this manual.
2.3
APPLICATION LIMITS
Safe and trouble-free operation of the machine is not assured in the following cases:
•
The machine is not operated in accordance with the operating manual.
•
The operator has not been instructed in the use of the machine.
•
The machine is used outside the scope of the intended use.
2.4
SETUP AND DIMENSIONS
The setup and appearance of the machine may differ from this figure, depending on the
configuration.
2.4.1 Setup
See figures on page 2.
No.
Description
1
Nosepiece
2
Front sleeve
3
Union nut
4
SD card slot for updating the software, see chapter 5.2
5
Hole for hanger bracket
6
Screen, see chapter 2.5.1
7
Keys, see chapter 2.5
8
RGB LED to indicate the operating status, see chapter 9.1
9
Label / type plate
10
Handle
11
Thread (on both sides) for belt clip or rivet application plate
12
Battery
13
Battery charge status indicator
14
Battery release button
15
LED for illumination of the riveting point
36 | English
Publicité
