Publicité
No.
Term
4
Grip range
5
Blind end
Fig. e
Blind rivet nut
Fig. f
Blind rivet bolt
-
Spindling
2.8
ACCESSORIES
WARNING
Unauthorised accessories
Serious injuries or material damage
•
Use only OEM accessories from HONSEL.
•
Read and observe the information in the operating manual before operating the
machine.
We have the right accessories for every application. Visit our website or contact HONSEL
Service, we will be happy to advise you.
Some accessories can be purchased in our shop
Accessories
Threaded mandrel for blind rivet nut
Threaded sleeve for blind rivet bolt
Nosepiece
Legend
Included in scope of delivery
The same nosepiece is used for both blind rivet nuts and blind rivet bolts.
2.9
OPERATING MODES
2.9.1 Spindle Mode
There are 3 setting options for screwing on the fastener:
•
Trigger
•
Variable trigger
•
Threaded mandrel / threaded sleeve
2.9.1.1 Trigger
The fastener is automatically screwed on when the trigger is pressed. Shown as "T" in the status bar.
38 | English
Description
Part thickness for which a fastener can be used
The bulge of the fastener produced by the deformation during the setting
process that seals the joint on one side
Fastener with internal thread that is set on one side
Fastener with external thread that is set on one side
The process during which the fastener is screwed into the threaded sleeve or
onto the threaded mandrel by the setting tool
M3
O
O
www.niet24.de
M4
M5
M6
O
O
O Optional accessories
M8
M10
O
O
M12
O
O
Publicité
