Publicité
No.
Description
16
Trigger
2.4.2 Dimensions
see "Tab. 1" on page 3
2.5
DISPLAY AND OPERATING ELEMENTS
Figure g
Display and operating elements
No.
Designation
1
Screen
2
Arrow up key
3
Arrow right key
4
Arrow down key
5
OK key
6
Arrow left key
2.5.1 Screen
Status bar: Displays the set status via:
•
Spindle Mode T/VT/M (see chapter 2.9.1)
•
SD card inserted
•
Battery status
•
WiFi (optional), BT (optional)
Info 1-4:
Displays the current settings for:
•
Setting mode S/F (see chapter 2.9.2)
•
Memory location (Setup ID)
•
Counter (iCounter)
Note:
Status and warnings (see chapter 9.1)
FW:
Firmware version
2.6
LEDS OF CHARGER
The LEDs on the charger have the warning and battery symbol, see separate manual.
2.7
GLOSSARY
Setting process for blind rivet nut: see figure e
Setting process for blind rivet bolt: see figure f
No.
Term
1
Nosepiece
Fig. e,
Threaded
2
mandrel
Fig. f,
Threaded
2
sleeve
3
Setting head
Description
Outermost component of the setting tool adapted to the dimensions of the
fastener used
Threaded mandrel with external thread adapted to the dimensions of the
blind rivet nut used, onto which the blind rivet nut is screwed by the setting
tool for the setting process
Sleeve with internal thread adapted to the dimensions of the blind rivet bolt
used, into which the blind rivet bolt is screwed by the setting tool for the
setting process
Head of the fastener
English | 37
Publicité
