Start-up / Operation
If the DCF radio signal is not detected, the radio signal detection stops after 10
minutes. Set the time manually (see section "Basic settings").
The DST icon 45 is displayed during daylight saving time.
The time is synchronised daily at 01:00, 02:00 and 03:00. Synchronisation is
attempted again at 04:00 and 05:00.
● Operation
● Basic settings
□
Press and hold the SET button 13 for approx. 3 seconds.
A beep sounds and the first setting can be changed.
□
Press the arrow up 14 or arrow down button 15 to change the respective
value.
The following settings are possible:
Year
Day/month - month/day
Month
Day
Time zone
Hour
Minutes
24H/12H
Language
RCC on/off
22
GB/IE/NI
Setting the year
Setting the date display
Setting the month
Setting the day
Setting the time zone
Setting the hour
Setting the minutes
Setting the time format
Setting the language
Turning the DCF radio signal detection
on/off