■
Keep the USB connection cable away from hot surfaces and sharp edges.
■
Do not make any changes to the product, power unit or USB connection cable.
■
Only have repairs on the product or the power unit carried out by an expert
workshop. Improper repairs can pose significant risks for the user.
■
Only operate the product with the power unit and USB connec
tion cable supplied. Only use the power unit and USB connection cable for
this product. In the event of a defect, the power unit and USB connection cable
may only be replaced with parts of the same type.
● Setup
Note: Protect sensitive surfaces with an underlay.
□
Place the radio-controlled weather station on a level surface with the foot folded
out 8 .
□
Place the outdoor sensor on a level surface. Make sure that the outdoor sensor
cannot topple over. IPX4 protection is not guaranteed if the outdoor sensor is
horizontal.
● Wall mounting
Note: Do not mount the wireless weather station or outdoor sensor higher than
2m.
The radio-controlled weather station can also be mounted on the wall (suspension
eye 4 ) and can be attached with suitable attachment material. Please observe
the conditions on site and ensure sufficient ventilation.
The outdoor sensor (suspension eye 25 ) may only be used standing up or
hanging down. Lying, the IPX4 protection is not guaranteed. For wall mounting, the
outdoor sensor can be fixed with suitable mounting material (not included in the
scope of delivery). Please observe the conditions on site and do not exceed the
100 m distance (open field) to the radio-controlled weather station.
Safety / Setup / Wall mounting
GB/IE/NI
19