Publicité
□
Confirm your selection by pressing the SET button 13 .
□
Press the arrow up 14 and arrow down button 15 to set the desired minute.
□
Confirm your selection by pressing the SET button 13 .
The time of one alarm function has been configured.
Note: The alarm function must be manually activated to become active (see
section "Activating/deactivating the alarm function").
● Activating/deactivating the alarm functions
The product features two alarm times that can be activated together or jointly.
□
Press the alarm button 16 once or several times to activate alarm 1 48 or
alarm 2 46 or both alarms, or to deactivate both alarms.
The respective alarm bell symbol is displayed.
● Snoozing or turning off the alarm function
The alarm sound of the alarm function sounds at the set time.
□
Press the SNOOZE / LIGHT button 5 to activate the snooze function.
The alarm sound stops and the snooze icon 47 starts to flash. The
alarm sounds again after five minutes.
□
Press any button on the back of the radio-controlled weather station.
The alarm function stops.
● Temperature alarm
A temperature range can be configured for each outdoor sensor. If the outdoor
sensor measures a value outside of the set temperature range, an alarm sounds on
the radio-controlled weather station.
□
Press the temperature warning button 17 .
The temperature alarm is activated and the temperature alarm icon
is lit.
40
Operation
GB/IE/NI
25
Publicité
