Husqvarna K 760 Cut-n-Break Manuel D'utilisation page 3

9. Cylinder cover
10. Starter
11. Starter handle
12. Muffler
13. Blades
14. Spray guard
15. Belt tensioner
16. Decompression valve
17. Air purge
18. Fuel cap
19. Water connection with filter
20. Clutch cover
21. Rating plate
22. Blade guards
23. Cutting arm
24. Water connector, GARDENA
25. Breaking tool
26. Combination spanner, torx
27. Bearing tool
28. Operator's manual
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 6 .
Dust forms when cutting. The dust
can cause injuries if inhaled. Use an
approved respiratory protection. Avoid
inhaling exhaust fumes. Always provide
for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the product. Refer to
10 .
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
2444 - 001 - 23.05.2024
®
Personal protective
Kickback on page
Make sure to always use the water
cooling system.
Make sure to always cut in the correct
direction.
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
Choke
Air purge bulb
Decompression valve
Starter rope handle
Use a fuel mixture of gasoline and oil.
This product complies with applicable EU
Directives.
Noise emission to the environment
complies with applicable EC Directives.
The noise emission of the product is
Technical data on page 28
specified in
and on the label.
3