Télécharger Imprimer la page

Husqvarna K 760 Cut-n-Break Manuel D'utilisation page 27

Masquer les pouces Voir aussi pour K 760 Cut-n-Break:

Publicité

Problem
There is much dust during
operation. You can see dust
in the air.
Transportation and storage
Safely attach the product during transportation to
prevent damage and accidents.
Remove the cutting blade before transportation or
storage of the product.
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Keep the cutting blades in dry, frost free conditions.
Examine all new and used blades for transport and
storage damage before assembly.
Clean and maintain the product before storage.
Maintenance on page 17 .
Refer to
Remove the fuel from the fuel tank before long-term
storage.
Disposal
Obey the local recycling requirements and applicable
regulations.
Discard all chemicals, such as oil or fuel, at a service
center or at an applicable disposal location.
When the product is no longer in use, send it to
a HUSQVARNA dealer or discard it at a recycling
location.
2444 - 001 - 23.05.2024
Cause
The water supply or water pressure
is not sufficient.
Transportation, storage and disposal
Possible solutions
Do a check of the water supply to the prod-
uct.
To do a check of the water supply
Refer to
system on page 25 .
27

Publicité

loading