Husqvarna K 760 Cut-n-Break Manuel D'utilisation page 14

A
• Follow the same saw cut, but deeper in the work
piece (C), and repeat the work with the crowbar.
• Repeat this work method until you get the necessary
cutting depth in the work piece (D, E).
D
• The blade guards are made to easily adapt to how
deep in the work piece the power cutter is moved.
14
C
B
E
Fuel
This product has a two-stroke engine.
CAUTION:
result in engine damage. Use a mixture of
gasoline and two-stroke oil.
Two-stroke oil
• For best results and performance use HUSQVARNA
two-stroke oil.
• If HUSQVARNA two-stroke oil is not available, use a
two-stroke oil of good quality for air-cooled engines.
Speak to your servicing dealer to select the correct
oil.
CAUTION:
oil for water-cooled outboard engines,
also referred to as outboard oil. Do not
use oil for four-stroke engines.
Premixed fuel
• Use HUSQVARNA premixed alkylate fuel for best
performance and extension of the engine life. This
fuel contains less harmful chemicals compared
to regular fuel, which decreases harmful exhaust
fumes. The quantity of remains after combustion is
lower with this fuel, which keeps the components of
the engine more clean.
To mix gasoline and two-stroke oil
Gasoline, liter
5
10
15
20
Incorrect type of fuel can
Do not use two-stroke
Two-stroke oil, liter
2% (1:50)
0.10
0.20
0.30
0.40
2444 - 001 - 23.05.2024