Publicité
Ovens Pando
Setting the pyrolytic
selfcleaning mode
1. Switch on the oven by pressing the button
2. Select the "Pyrolytic" operating mode by pres-
sing. Pyrolysis programme
3. Check that all accessories and food have
been removed and that the door is securely
closed.
4. Press the "Start / Stop" button to start the cle-
aning operation.
5. Ventilate the kitchen when the cleaning func-
tion is on. is in operation.
6. The cooking compartment locks the door
shortly after the start of operation. The coo-
king compartment cannot be opened until the
temperature is reduced.
Pyrolysis mode end signal
If an acoustic signal sounds continuously and
the oven stops heating. This means that the
pyrolytic mode has ended. You can press the bu-
tton to turn off the beeps, or the beeps will turn
off automatically later.
After the pyrolysis mode has
ended
Once the cooking compartment has cooled
down, use a damp cloth to wipe off any ash left
in the cooking compartment and around the
door.
NOTES: During pyrolytic mode, the frame inside
the oven may discolour and you may also noti-
ce white spots on the enamelled surface. This
is normal and does not affect performance. The
discolouration can be removed with the help of
a stainless steel cleaning product and the whi-
te marks are food residues that can be removed
with lemon juice and other cleaning products.
Please note that ....
•
Once pyrolysis mode is activated, the oven
will automatically lock and the oven door
cannot be opened.
•
You will also not be able to change any se-
ttings except to pause and start once clea-
ning has begun.
English
199
199
Integral Cooking
Integral Cooking
Publicité
