Publicité
English
Function Lock & Power On
Your oven is fitted with a safety lock so that it can not
be switched on or any settings changed accidentally.
A long press for 3 seconds activates the lock. A
further long press of 3 seconds unlocks the oven
again.
You can activate and deactivate the lock when the
oven is running or stopped, by long pressing
3 seconds on the symbol.
Demo Mode (DEMO)
(Special function for exhibitions)
When the demonstration mode is activated, the
switch-off and switch-on are still active but the
heating elements do not work.
1. From standby mode, press and hold the
power symbol "
is activated. The following will appear on the
display
00 : 00 OFF
2. Slide the slider to switch from OFF to OFF
mode. ON mode. The following will appear on
the display:
00 : 00 ON
3. After 3 seconds the configuration is activated.
The following will appear on the display:
00 : 00 _
190
190
Integral Cooking
Integral Cooking
" until the demo mode
NOTE: You can press the Cancel button to exit
the setting, or wait 3 seconds to automatically
exit the demo mode setting state and return to
the standby state.
Manual Cleaning Function
This function facilitates the removal of grease
and other food debris that may have adhered
for
to the sides of the oven. To facilitate cleaning,
do not allow dirt to accumulate. Clean the oven
frequently.
PLEASE NOTE THIS BEFORE
STARTING THE CLEANING FUNCTION !
Do not pour hot water into the oven and
make sure the oven is cool before you
start, as this may damage the enamel.
Before touching the surface of the oven,
make sure that it has cooled down
completely.
Do not open the oven door until the
function has finished. The cooling
cycle is necessary for the function to
work properly.
Dirt and excess water can be removed
with a damp cloth.
If further cleaning is required after using
the cleaning function, use neutral
detergents and non-abrasive sponges.
Ovens Pando
Publicité
