Sony Handycam DCR-TRV12E Mode D'emploi page 244

Changing the menu settings
Icon/item
PLAYER SET
VCR SET 2)
HiFi SOUND
AUDIO MIX
A/V t DV OUT
NTSC PB
LCD/VF SET
LCD B.L.
LCD COLOUR
VF B.L.
1)
DCR-TRV12E/TRV14E
2)
DCR-TRV19E/TRV22E/TRV33E
3)
DCR-TRV22E/TRV33E
Note on NTSC PB
When you play back a tape on a Multi System
TV, select the best mode while viewing the
picture on the TV.
244
Mode
1)
/
z STEREO
1
2
——
z OFF
3)
ON
z ON PAL TV
NTSC 4.43
z BRT NORMAL
BRIGHT
——
z BRT NORMAL
BRIGHT
Meaning
To play back the stereo tape or dual sound track
tape with main and sub sound (p. 286)
To play back the stereo tape with the left sound or
the dual sound track tape with main sound
To play back the stereo tape with the right sound
or the dual sound track tape with sub sound
To adjust the balance between stereo 1 and stereo
2 (p. 132)
ST1
To output digital images and sound in analog
format using your camcorder
To output analog images and sound in digital
format using your camcorder (p. 238)
To play back a tape recorded in the NTSC colour
system on a PAL system TV
To play back a tape recorder in the NTSC colour
system on a TV with the NTSC 4.43 mode
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the colour on the LCD screen with r/R
Low intensity
To set the brightness on the viewfinder screen to
normal
To brighten the viewfinder screen
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is
reduced by about 10 percent during
recording.
•When you use power sources other than the
battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD B.L., LCD COLOUR
and VF B.L.
The recorded picture will not be affected.
ST2
High intensity
POWER
switch
1)
/
2)
1)
/
2)
1)
/
2)
1) /
2)
3)
1)
/
2)
3)
1)
/
2)
3)