Selecting The Mode Setting Of Each Item - Sony Handycam DCR-TRV12E Mode D'emploi

English
Changing the menu settings

Selecting the mode setting of each item

Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
AUTO SHTR
1) DCR-TRV22E/TRV33E
2)
DCR-TRV12E/TRV14E
3)
DCR-TRV19E/TRV22E/TRV33E
Note on FLASH MODE and FLASH LVL
You cannot adjust FLASH MODE and FLASH
LVL if the external flash (optional) is not
compatible.
242
Mode Meaning
—— To suit your specific shooting requirement (p. 80)
—— To add special effects like those in movies or on
the TV to images (p. 76, 92)
z ON To trigger the flash (optional) regardless of the
brightness of the surroundings
ON To trigger the flash (optional) regardless of the
brightness of the surroundings. The flash goes off
prematurely to reduce the red-eye phenomenon.
AUTO To trigger the flash (optional) automatically
AUTO To trigger the flash (optional) automatically. The
flash goes off prematurely to reduce the red-eye
phenomenon.
HIGH To make the flash (optional) level higher than
normal
z NORMAL To use the normal setting
LOW To make the flash (optional) level lower than
normal
—— To adjust the white balance (p. 69)
z ON To automatically activate the electronic shutter
when shooting in bright conditions
OFF Not to activate the electronic shutter even when
shooting in bright conditions
z is the default setting.
Note on FLASH MODE
If the flash is not capable of preventing the red-
eye phenomenon, you can select only ON or
AUTO.
Note on the electronic shutter
The electronic shutter function electronically
adjusts the shutter speed.
POWER
switch
1)
2) /
3)
1)
1)
1)