BRITAX Child Safety, Inc.
5� Position the harness
straps around the child
(see page 21)�
NOTE: Adjust the harness
to fit the clothes the child
is wearing. Remove bulky
coats, jackets and/or
bulky sports equipment
before putting the child in
the child seat.
6� Fasten the harness
buckle� Proper connection
is confirmed with a click
after inserting each buckle
tongue�
7� Pull the harness adjuster
strap to tighten the
harness�
NOTE: The harness
should have a snug fit
around the child. A snug
strap should not allow
any slack. It lies in a
relatively straight line
without sagging. It does
not press on the child's
flesh or push the child's
body into an unnatural
position. You should not
be able to pinch excess
8� Fasten the chest clip and
place at armpit level�
Before traveling, verify that the:
9 Harness straps are not twisted�
9 Harness is snug�
9 Buckle is fastened�
9 Chest clip is at the child's armpit level�
9 Bulky coats, jackets, and/or bulky sports
equipment are removed�
18
Pull the harness adjuster
away from the child seat
(parallel to the ground) to
tighten.
Do not pull sideways.