Publicité
Booster Mode
Only use a lap-shoulder belt to secure the child in
booster mode�
Use the shoulder belt guides on the child seat to
ensure proper fit�
Ensure the lap part of the vehicle belt sits low across
the child's upper thighs and that the shoulder part does
not contact the child's neck�
Before you begin:
• If your vehicle seat back is adjustable, ensure it is in the upright
position before placing the child seat on the vehicle seat.
• Adjust the child seat to the upright position and place forward
facing on the vehicle seat, if not already installed (see page 8).
1� Adjust the head restraint
to the highest position�
2� Place the child in the
child seat� Ensure the
child is positioned upright
in the child seat and not
slouching� Their bottom
must touch the child seat
and their back must rest
flat against the back of the
child seat�
3� Route the shoulder
part of the vehicle belt
through the red shoulder
belt guide and fasten the
vehicle belt across the
child�
4� Adjust the head restraint
so that the vehicle
shoulder belt lays straight
across the center of the
child's chest, above the
child's shoulder and does
not contact the child's
neck (A)� The lap part of
the vehicle belt should be
worn under the armrests
and rest low on the child's
upper thighs (B)�
NOTE: Ensure the head
restraint has locked into
position.
GROW WITH YOU User Guide
19
Publicité
