Publicité
Securing Your Child
Harness Mode
Never route the vehicle belt over the child when using
this child seat in harness mode�
Adjust the belts provided with this child seat so they
fit snugly around your child� A snug strap should not
allow any slack� It lies in a relatively straight line without
sagging� It does not press on the child's flesh or push
the child's body into an unnatural position�
Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child
seat is used�
Before you begin:
Always check the seat area for debris and remove it to prevent
interference with the harness adjuster mechanism.
1� Loosen the harness�
a� Press the release lever�
b� Pull both harness straps
forward�
2� Open the chest clip�
a� Press tabs�
b� Pull apart�
3� Release the buckle and
place the harness straps
around the armrests�
4� Place the child in the
child seat� Ensure the
child is positioned upright
in the child seat and not
slouching� Their bottom
must touch the child seat,
and their back must rest flat
against the back of the child
seat�
GROW WITH YOU User Guide
17
Publicité
