Publicité
Booster Mode
Position forward-facing only in a seating position with a
lap-shoulder belt�
Use only the vehicle's lap and shoulder belt system when
securing a child in booster mode� Never secure a child
with a lap belt only in booster mode�
Always secure the unoccupied child seat to the vehicle
by attaching the lower connectors to the lower anchors in
the vehicle, or by fastening the vehicle seatbelt across the
unoccupied child seat�
If the lower anchors in your vehicle prevent proper vehicle
belt fit across your child you cannot use LUAS to position
this seat in booster mode� See below:
The vehicle belt fits properly when the
vehicle shoulder belt lays straight across
the center of the child's chest, above the
child's shoulder and does not contact
the child's neck (A)� The lap part of the
vehicle belt should be worn under the
armrests and rest low on the child's
upper thighs (B)�
•
This child seat can be used in booster mode with
children who weigh between 18 and 54 kg (40 and 120
lbs) and stand between 112 and 160 cm (44 and 63 in�)
in height� Britax recommends using booster mode only
once your child has outgrown harness mode�
•
This child seat cannot be
in the recline position when
used in booster mode�
•
In booster mode, this child
seat can be positioned on
the vehicle seat using the
LUAS�
•
Use the vehicle's lap-
shoulder belt to secure
the child� Ensure that the
LUAS does not interfere
with the vehicle belt
function and alignment
when securing your child�
GROW WITH YOU User Guide
9
Publicité
