Publicité
BRITAX Child Safety, Inc.
Using the Harness Buckle
To Fasten: Insert one tongue
at a time into the buckle�
NOTE: Proper connection
is confirmed with an
audible click after
inserting each buckle
tongue.
To Release: Press the
release button and pull the
tongues from the buckle�
NOTE: Periodically clean
the buckle to ensure
proper operation. See
page 42.
Using the Chest Clip
1� Open the chest clip�
a� Press tabs�
b� Pull apart�
2� Push together to fasten�
NOTE: Always position the
chest clip at armpit level.
Using the Recline
IMPORTANT:
position in booster mode�
This seat may be used in either the upright or recline
position in harness mode�
1� Pull the recline adjustment handle and adjust the seat to
the desired position (see page 8).
a� Ensure that the seat is
locked into the desired
position before installing
in the vehicle�
b� Ensure the top of the
child seat does not rest
against the top of the
vehicle seat back while
reclining�
c� Pay attention while adjusting the recline to keep
hands clear of any pinch point�
24
This child seat must be used in the upright
Publicité
