Burkert 8077 Manuel D'utilisation page 6

Various dangerous situations
To avoid injury take care:
▶ not to subject the device to any mechanical stresses.
▶ to prevent any unintentional power supply switch-on.
▶ to ensure that installation and maintenance work are carried out
by qualified, authorised personnel in possession of the appropri-
ate tools.
▶ to guarantee a set or controlled restarting of the process after a
power supply interruption.
▶ to observe the general technical rules.
6
English
Type 8077
Basic safety information
note
the device may be damaged by the fluid in contact with.
▶ Systematically check the chemical compatibility of the compo-
nent materials of the device and the fluids likely to come into
contact with it (for example: alcohols, strong or concentrated
acids, aldehydes, alkaline compounds, esters, aliphatic com-
pounds, ketones, halogenated aromatics or hydrocarbons,
oxidants and chlorinated agents).
note
elements / components sensitive to electrostatic discharges
▶ This device contains electronic components sensitive to electro-
static discharges. They may be damaged if they are touched by
an electrostatically charged person or object. In the worst case
scenario, these components are instantly destroyed or go out of
order as soon as they are activate
▶ To minimise or even avoid all damage due to an electrostatic
discharge, take all the precautions described in the standard
EN 61340-5-1
▶ Also ensure that you do not touch any of the live electrical
components.