Publicité
5 Remove the outlet cover by turning it anti-
clockwise and lifting off
6 Place the compact chopper/grinder onto the outlet
and turn clockwise
7 Switch onto maximum speed or use the pulse
control.
hints
Herbs are best milled when clean and dry.
care and cleaning
Always switch off and unplug before cleaning.
Dismantle attachments fully before cleaning.
power unit
Wipe with a damp cloth, then dry.
Never use abrasives or immerse in water.
Store excess cord in the storage compartment
at the back of the machine.
Ensure the feet on the base of the mixer are kept
clean.
bowl, tools, splashguard
Wash by hand, then dry thoroughly.
Never use a wire brush, steel wool or bleach to
clean your stainless steel bowl. Use vinegar to
remove limescale.
Keep away from heat (cooker tops, ovens,
microwaves).
creaming beater
1 Always remove the flexible wiper blade from the
tool before cleaning
2 Wash the flexible wiper blade and tool in hot soapy
water, then dry thoroughly. Alternatively the parts
can be washed in a dishwasher.
Note: Please inspect the condition of the tool body
before and after use and also regularly inspect the
condition of the wiper blade and replace it if there
are any signs of wear.
food processor
Handle the blades and discs with care –
they are extremely sharp.
Some foods may discolour the plastic. This is
perfectly normal and won't harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
citrus juicer
Wash by hand, then dry thoroughly.
.
until it clicks into position.
.
blender/compact chopper/grinder
1 Empty the goblet/jar before unscrewing it from the
blade unit.
2 Wash the goblet/jar by hand.
3 Remove and wash the seals.
4 Do not touch the sharp blades – brush them clean
using hot soapy water, then rinse thoroughly under
the tap. Do not immerse the blade unit in
water.
5 Leave to dry upside down.
juice extractor
For easier cleaning always wash the parts
immediately after use.
Some foods, e.g. carrot, will discolour the plastic.
Rubbing with a cloth dipped in vegetable oil helps
remove discolouring.
Clean the filter using a soft brush.
Check the filter regularly for signs
of damage. Do not use if the filter is
damaged. Refer to "service and customer
care".
food mincer
Wash all parts in hot soapy water, then dry
thoroughly. Do not wash any part in the
dishwasher. Never use a soda solution.
Wipe the screens with vegetable oil, then wrap in
greaseproof paper to prevent discolouring/rusting.
pasta maker
Screens
Use the cleaning tool
the screens.
Allow the dough to dry in the screens before using
the cleaning tool.
If the dough is difficult to remove from the screen,
place the screen in the freezer for 10 minutes and
lightly tap the screen on the worksurface to remove
the dough.
Wash the screens in hot soapy water, then dry.
Plastic Pasta scroll
Do not immerse in water.
Wipe clean, then dry.
12
to remove all dough from
Publicité
