GB
Malfunction
Rough cut.
Grass catcher does not
fill up.
Travel drive, brake, clutch
and mower mechanism.
13 TECHNICAL DATA
Ride-on mower
Item no.
Engine
Name
Type
Operating mode
Engine starting
Engine speed [rpm]
Engine output [kW]
3
Displacement [cm
]
Fuel tank capacity [litres]
Ride-on mower
Max. driving speed [km/h] at 3,000
rpm (forwards / backwards)
48
Cause
Blade worn, blunt.
Incorrect cutting height.
Engine speed too slow.
Driving speed too fast.
Different tyre pressure at wheels. Inflate to correct air pressure. Read off
Cutting height set too low.
Grass is wet – it is too heavy to
be transported by air stream.
Blades severely worn down.
Grass in lawn too tall.
Fabric bag blocked – no air
throughput.
Discharge channel/mower deck
contaminated.
R7-62.5
127306
B&S series 950 E
4.5 / 1.4
Remedy
Renew or regrind blade. Reground
blades must be rebalanced (customer
service workshop)!
Correct the cutting height.
Set maximum engine speed.
Reduce driving speed.
correct tyre pressure on tyre.
Correct the cutting height.
Mow at a later time when lawn has dried
out.
Change blade. (Customer service work-
shop)
Mow grass twice:
■
1st pass: max. cutting height
■
2nd pass: desired cutting height.
Clean fabric bag.
Clean discharge channel/mower deck.
Only have the check performed in a
customer service workshop!
R7-63.8 A
127486
AL-KO Pro 225
14B9
1P75F
Petrol
E-start/manual start
3.97
223
1.1
4.5 / 1.4
R7-65.8 HD
127487
B&S series 950 E
3000
4.2
224
1.4
5.9 / 3.0
R7-62.5 | R7-63.8 A | R7-65.8 HD
Technical data
14B9
3.97
223
1.1