Publicité
● Immediate mowing:
Call up the Start mowing command
(
11.5).
The mowing operation starts
immediately and continues until the
selected time.
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
(
24.)
A running mowing operation can be
ended manually at any time using the
STOP button. (
5.1)
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.
15.6 Docking the robotic mower
Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
● If necessary, switch on the
docking station (
13.1)
● Activate drive home. (
11.6)
During a mowing operation,
Homecall can also be activated
on the docking station.
● The robotic mower can also be sent to
the docking station using the app.
(
10.)
After docking, no further mowing
operation takes place in the current
active time.
0478 131 9965 D - EN
Manual docking:
● Push the robotic mower into the
docking station by hand.
Lift the robotic mower slightly by the
carrying handle (1) to relieve the weight on
the drive wheels. Push the machine,
resting on its front wheels, into the docking
station.
15.7 Charging the battery
Only charge the battery via the
docking station.
Never remove the battery and
charge it using an external charger.
Automatic charging:
During mowing, charging occurs
automatically when the robotic mower
docks into the docking station at the end of
the mowing operation.
Starting charging manually:
● Following use in secondary areas,
return the robotic mower to the mowing
area and dock it. (
15.6)
● Dock the robotic mower following
interruption of a mowing operation.
(
15.6)
● If necessary, end standby mode of the
robotic mower by pressing a button.
Charging starts automatically.
Charging:
During charging, the text "Charging
battery" is displayed in the status
screen.
A plug symbol appears instead of
the battery symbol in the information
area of the display in all the other
menus.
The charging time varies and is
automatically adapted to the subsequent
period of use.
In the event of charging problems,
a corresponding message appears
on the display. (
24.)
The battery is only charged when
the voltage falls below a certain
value.
Charge state:
The momentary charge state can be
seen in the status screen when the
relevant display is selected.
(
11.12)
In all other menus, the battery
symbol in the information area of
the display serves to indicate the
charge state. (
11.3)
161
Publicité
