Publicité
Divided mowing area – the robotic mower
cannot travel independently from one
mowing area to the other.
Docking station:
Location (1) directly next to the houses A
No-go areas:
Installation around the free-standing tree
and around the vegetable patch B based
on a linking section installed at right angles
to the edge.
Wire clearances: (
12.5)
Clearance to adjoining area that can be
travelled on (e.g. patio) with a stepped
area height of less than +/- 1 cm: 0 cm
Clearance to high obstacles: 28 cm
Clearance to the tree: 28 cm
Minimum wire clearance in the confined
areas behind the vegetable patch: 44 cm
0478 131 9965 D - EN
Secondary area:
Installation of a secondary area C, linking
section (3) on the patio accommodated in
a cable duct.
Programming:
Define the size of the mowing area
(without secondary area), program one
starting point (4) in the confined area for
using the offset drive home function
(
11.13) – starting frequency 2 of 10
operations (
11.14)
Points to note:
Bring the robotic mower to the secondary
area several times per week and activate
the "Start" menu. (
11.5)
Take the mowing performance into
account. (
14.4)
If necessary, install two separate mowing
areas with 2 docking stations.
187
Publicité
