Publicité
– Radio module is not activated
Remedy:
– Have radio module checked by a STIHL
specialist dealer ( )
Fault:
The robotic mower cannot be reached
using the app
Possible cause:
– Radio module inactive
– Robotic mower is in standby mode
– No Internet connection
– Robotic mower is not associated with
correct e-mail address
Remedy:
– The radio module is switched off during
linking, then it is reactivated and the
robotic mower can be reached again
– Activate robotic mower by pressing
button, set "Standard" energy mode
(
11.10)
– Connect machine on which app is
installed to Internet
– Correct e-mail address (
Fault:
Internal mapping for direct drive home
cannot be created
Possible cause:
– Edge following interrupted or aborted,
e.g. by an obstacle, machine being
lifted
– Incorrect wire routing
– Robotic mower leaving perimeter wire
Remedy:
– Repeat edge following, edge following
must be carried out without interruption
– Carry out edge following at a later time
– Correct wire routing
0478 131 9965 D - EN
26. Service schedule
26.1 Handover confirmation
10.)
26.2 Service confirmation
Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
2
183
Publicité
