Publicité
Les langues disponibles
Les langues disponibles
7.
Technical data
Rated voltage
Battery type
Cutting length
Guide rail type
Guide rail length
Saw chain type
Chain pitch
Chain thickness
Maximum chain speed
Sprocket teeth
Oil tank content
Net weight without
chain, blade, battery
and chain oil
Subject to technical changes!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
WA/pA
Vibration parameters
Vibration rear handle
Bow-type handle vibration
Uncertainty K
h
The specified device emissions values have been
measured in accordance with a standardised test pro-
cedure and can be used for the comparison of one
device with another. The specified device emissions
values can also be used for an initial estimation of the
load.
40 V DC
Li-Ion 20V / 2 Ah
33 cm
Kangxin AP14-53-507P
14"
Kangxin 3/8LP-53
9.525 mm (3/8")
1.27 mm
15 m/s
6 x 9.525 mm
260 ml
3.2 kg
104.8 dB
92.5 dB
3 dB
4.61 m/s²
4.20 m/s²
1.5 m/s²
www.scheppach.com
Information on noise emission in accordance with the
Product Safety Act (ProdSG) or EC Machinery Direc-
tive: The noise pressure level at the workplace can
exceed 80 dB. In this case, noise protection measures
for the operator are required (e.g. wearing suitable
and designated hearing protection and taking regular
breaks).
m WARNING!
In case of extended working periods, the operating
personnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that caus-
es the small blood vessels on the fingers and toes to
cramp in spasms.
The affected areas are no longer supplied with suffi-
cient blood and therefore appear extremely pale. The
frequent use of vibrating devices can cause nerve
damage in people whose circulation is impaired (e.g.
smokers, diabetics). If you notice unusual adverse
effects, stop working immediately and seek medical
advice.
Observe the following information to reduce hazards:
Keep your body warm, especially your hands, es-
1.
pecially in cool weather.
Take regular breaks and move your hands to pro-
2.
mote circulation.
Limit the use of high vibration tools per day and
3.
spread them over several days Make a work
schedule that limits vibration exposure.
4.
Ensure as little vibration as possible of the tool via
regular maintenance and stable parts on the de-
vice. Replace worn parts immediately.
Change your working position regularly.
5.
If the machine is to be used or operated frequent-
6.
ly, you should contact your specialist dealer and
request anti-vibration accessories (handles) if ap-
plicable.
8. Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
GB | 39
Publicité
