Publicité
Les langues disponibles
Les langues disponibles
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working
with your new device.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you familiarise
yourself with your power tool and teach you how to use
it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool. In ad-
dition to the safety instructions in this operating man-
ual, you must also observe the regulations applicable
to the operation of the power tool in your country. Keep
the operating manual package with the power tool at
all times and store it in a plastic cover to protect it from
dirt and moisture. They must be read and carefully ob-
served by all operating personnel before starting the
work. The power tool may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
Rear handle
1.
On/off switch
2.
3.
Switch lock
Battery slot
4.
5.
Protective cover
6.
Saw chain
7.
Guide rail
Claw stop
8.
Hand guard/chain brake
9.
10. Bow-type handle
11. Chain tensioning wheel
12. Chain cover
13. Hand wheel
14. Oil fuel cap
15. Oil tank with level indicator
16. Housing
17. Main switch
18. Battery
19. Battery charger
20. Battery charge status indicator
3. Scope of delivery
• Operating manual
• Battery *
• Battery charger *
• Chainsaw
(*may not be included in the scope of delivery)
4. Proper use
The chain saw may only be used for sawing wood out-
doors up to a diameter corresponding to the cutting bar
length used. The chainsaw must not be used for any
other purpose. Do not make any modifications to the
chainsaw. Safety may be compromised as a result. The
user/operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
www.scheppach.com
GB | 33
Publicité
