Christopeit Sport Kinomap EM8000 Instructions De Montage Et D'utilisation page 20

COMPUTER DESCRIPTION
DISPLAY
[TIME] Time: 00:00~99:59.
[HEIGHT] Height in cm: Input in the body fat program
[FAT%] Body fat in %: Result in the body fat program
[DISTANCE] Distance in km: 0.00~99.99 km
[WEIGHT] User weight in kg: Input in the body fat program
[ODO] KM Total: The distance in km of all training units is
displayed only in the start display.
[CAL] Calories in Kcal: 0~999kcal
[AGE] Age in years: Input in the HRC and body fat program
[°C °F] Temperature display: The temperature display in
Celsius or Fahrenheit depends on the model. (Not available for
the EM 8000 product)
[SPEED] Speed in Km/h: 0.0~99.9 Km/h
[PROGRAM] Program number: 1-24
[LEVEL] Resistance Level: 1~32 level
[WATTS] Watts: 0-999 watts
[GENDER ] Gender
fat program
[RPM] Revolutions per minute: 0~15~999
[START/STOP] Status: Start / Stop indication
[PULSE] Pulse display: P~40~240 maximum possible value.
Heart icon flashes when heart rate data is received.
Program graphics: 01 manual, 02-13 programs, 14-17 user,
18-22 H.R.C, 23 watts, 24-body fat
Start display (for 2 seconds):
Top row - left: Bluetooth identification number for app operation
Top row - right: Km Total (ODO).
Bottom row - left: code for speed programming
Male / Female: Input in body
KEYS
[T-TEST] key: fitness test.
[B-BODYFAT] key: body fat analysis.
[E-ENTER] key: Confirms a program selection, calls up input
functions and confirms them. All default values are reset by
pressing for approx. 2 seconds.
[+] - [-] keys: Increases or decreases a preset value or calls
up the next or previous function in the selection. (Only flashing
information can be changed/confirmed.) Pressing and holding
the key activates fast forward.
[START/STOP] key: Starts or pauses or stops the training
program.
OPERATION
Use
1. Connect the AC adapter with the product and one correctly
connected socket. The display in the computer lights up
accompanied by a signal tone and briefly shows internal data for
bluetooth interface, ODO speed programming. Then MANUAL
appears in the display and you are in the manual program 01.
2. Use the [+/-] keys to select a program 1-24: (01=Manual,
02-13=Program, 14-17=User, 18-22=H.R.C., 23=Watt, 24=FAT)
and confirm by pressing the [E] key. The default values such as
[TIME] time, [DISTANCE] distance, [CAL] calories and [P] pulse
in the selected program can be called up with the [E] key and
changed by using the [+/-] keys.
3. When the program and the default values are set, press the
[START/STOP] key to start training.
4. Pressing the [START/STOP] key again ends or interrupts
the program. All values achieved up to that point are saved for
4 minutes and you can continue training within the 4 minutes
starting from these values, or set all functions to zero by pressing
the [E] key for about 2 seconds.
5. The computer switches off automatically about 4 minutes after
the end of the training session and resets the values to zero.
20
GB