Assigning Numbers To The; Speed-Dial Buttons; Viewing Stored Numbers; Dialing With Speed-Dial Buttons - HumanTechnik Scalla2 Mode D'emploi

Speed-dial buttons

Assigning numbers to the speed-dial
buttons
Any telephone number (a maximum of 32
digits) can be assigned to the 4 speed-dial
buttons and the 8 photo speed-dial buttons.
1. Enter the "telephone number" you require.
2. Press and hold one of the
buttons or a photo speed-dial button to
assign the telephone number you have
entered to that button.
Note: To change a stored number, you must
save the new number to replace the old
number.

Viewing stored numbers

Press one of the
photo speed-dial button to see the number
in the display. The receiver has to be on the
hook.

Dialing with speed-dial buttons

Lift up the receiver or press the
Press one of the
photo speed-dial button to dial the telephone
number you have entered for that button.
Storing a number from the call display,
redial or phonebook on a speed-dial
button
Once the number can be seen in the display,
press and hold one of the
or a photo speed-dial button until "Stored"
appears in the display. The number is now
stored on the speed-dial button selected.
38 English
...
M1
... buttons or a
M1 M4
.
... buttons or a
M1 M4
... buttons
M1 M4

Assigning numbers to the dial buttons

Any telephone number (a maximum of 32
digits) can be assigned to the 10 dial
buttons, too.
1. Press and hold the "Auto" button until the
display shows "-->".
2. Enter the desired "telephone number".
M4
3. Press the button "Auto" again. The dis-
play will now show "-->?".
4. Enter the desired number of the speed-
dial button (0...9). The display now shows
"Stored".
Viewing numbers stored for the speed-
dial buttons
Press the "Auto" button and the desired
speed-dial button. The stored number will
appear in the display. The receiver must be
on the hook.

Dialing with keypad buttons

1. Lift up the receiver or press the
2. Press the "Auto" button and the desired
dial button to dial the telephone number
you have entered for that button.
.