Berner BMS-777-1 Traduction De La Notice D'instructions D'origine page 34

EngLIsh
CROSS-CUT MITRE SAW
BMS-777-1
Congratulations!
You have chosen a BERNER tool. Years of experience, thorough
product development and innovation make BERNER one of the
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
LED
Power input
Blade diameter
Blade bore
Max. blade speed
Kerf width
Mitre (max. positions)
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 48°
bevel 45°
bevel 48°
Overall dimensions
Weight
LED Energy Efficiency
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (sound pressure)
PA
L (acoustic power)
WA
K (acoustic power uncertainty)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
34
BMS-777-1
V 230
AC
3
Yes
W 1800/1600
mm 216
mm 30
min 6300
-1
mm 2.6
left and right 50°
left 48°
bevel 45°
mitre 45°
mm 60 × 270
mm 60 × 190
mm 60 × 180
mm 48 × 270
mm 45 × 270
mm 460 × 560 × 430
kg 15.5
F
dB(A) 96
dB(A) 107
dB(A) 3
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the hands
warm (relevant for vibration), organisation of work
patterns.
EC-Declaration of Conformity
Machinery Directive
CROSS-CUT MITRE SAW
BMs-777-1
BERNER declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015 + A11:2022;
EN IEC 62841-3-9:2020+A11:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BERNER at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BERNER.
i.V. Michael Götz
Vice President Procurement
International
Berner Omnichannel Trading Holding SE
Bernerstraße 6, 74653 Künzelsau, Germany
01.07.2024
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word.
Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
i.V. Jan Christoffers
Senior Director Quality
Management