Publicité
Les langues disponibles
Les langues disponibles
UK
and one having the following environmental conditions:
good ventilation;
room temperature ranging between -20 °C and +50 °C;
relative humidity of the compressed air ranging between 30% and 80%;
if possible, in a dry and dust-free atmosphere.
ATTENTION:
4.5 Dis-installation
In case it is necessary to dis-install the
Installation in its reverse order.
DANGER :
The following Individual Protection Devices are necessary to perform the task being examined:
5
.
M
a
i
n
t
e
n
a
5
.
M
a
i
n
t
e
n
a
5.1 General maintenance details
To ensure maximum reliability of the
instructions and the cautions reported in the following pages.
DANGER :
ATTENTION:
Before performing any type of maintenance or cleaning intervention reported in this paragraph, it is necessary to disconnect the
from the electrical power supply.
COMPLETED MACHINERY
DANGER :
5.2 Signs concerning Safety
To correctly perform the maintenance or cleaning interventions, it is essential to bear in mind the indications reported below.
During the interventions, it is necessary to signal the intervention on the
signs must be positioned so as to prevent any type of undesired intervention on the
During the interventions, only authorized personnel may access the work area.
ATTENTION:
DANGER :
All the materials with an environmental impact which need to be eliminated following maintenance interventions must be
disposed of in accordance with the norms in force.
do not remove the packing that is possibly provided for certain components of the
or adopt appropriate precautions to protect the parts exposed.
MACHINERY
PARTLY COMPLETED MACHINERY
the Manufacturer rejects any responsibility for possible damages to things and/or persons
stemming from improper interventions performed by unqualified, untrained, or unauthorized
personnel.
n
c
e
a
n
d
D
e
m
n
c
e
a
n
d
D
e
m
PARTLY COMPLETED MACHINERY
for safety purposes, all the maintenance operations reported in this chapter must only be performed by
qualified and specifically trained technicians.
The appointed technicians, moreover, must have all the tools and the IPD necessary to operate safely.
to always guarantee the full efficiency and safety of the
prevent problems tied to wear-out of the safety measures or to machine stoppages that may prove costly, it
is necessary to implement an effective pre-emptive maintenance, planning interventions at set intervals,
with the purpose of renewing or replacing the parts prone to normal wear-out and of checking the overall
condition of the mechanical and electrical components that make up the
providing the indications on any possible extraordinary operations that may prove necessary .
the Manufacturer rejects any responsibility for possible damages to things and/or persons
stemming from improper interventions performed by unqualified, untrained, inadequately
equipped, or unauthorized personnel.
the maintenance and cleaning interventions must only be performed by expert personnel that has read and
understood all the indications reported in these assembly instructions.
only disassemble the parts of the
the specific maintenance operation.
, perform the installation sequence described in Paragraph 4.3 -
o
l
i
t
i
o
n
o
l
i
t
i
o
n
and to avoid conditions of danger, diligently adhere to the
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
to the operators, and to
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
with suitable signs (these
PARTLY COMPLETED MACHINERY
that are actually necessary to perform
RC-RCS Pag - 50 - REV 02 03/16
PARTLY COMPLETED
, thus
PARTLY
).
Publicité
