Publicité
Les langues disponibles
Les langues disponibles
UK
3.5 Proper and improper use of the partly completed machinery
The
PARTLY COMPLETED MACHINERY
and commercial refrigeration in a permanent site.
Each model of the
PARTLY COMPLETED MACHINERY
The
PARTLY COMPLETED MACHINERY
atmosphere.
It is a sound cautionary norm to place powder extinguishers near the
outbreak, it is necessary to keep the
The use of the
PARTLY COMPLETED MACHINERY
the plate could cause damages to persons or to the
which the Manufacturer does not deem itself responsible.
ATTENTION:
3.6 General Warnings and Behavioral Norms
In order to avoid any condition of risk to persons or of damages to the
follow the general warnings and behavioral norms reported herein.
DANGER:
The operators appointed to manage the
operate in a comfortable environment that can ensure the best possible conditions of safety and hygiene.
DANGER:
Before using the
PARTLY COMPLETED MACHINERY
that there are no operators in the dangerous areas near the
Before using the
PARTLY COMPLETED MACHINERY
safety devices are present and efficient.
After having removed the packing, make sure that all the parts of the machine are intact; if they are not, contact the retailer.
Carefully read the labels on the
they get damaged.
Do not lay liquid containers on the
Consult these instructions with regard to the safety provisions in force and to the specific IPD to be adopted for personal safety;
more specifically, at any rate, the personnel appointed to the
paying the necessary attention to:
flapping clothing,
loose sleeves,
dangling neckties or scarves,
necklaces, bracelets, and rings.
The personnel appointed to maintenance on the
reported in Chapter 5 - Maintenance and Demolition and have adequate technical preparation to correctly interpret the
instructions and annexed diagrams and to intervene on the
The area where the maintenance operations are performed must always be clean, dry, and with the suitable equipment always
available and efficient.
In case it were necessary to perform interventions near electrical components, operate with thoroughly dried hands and use
dielectric gloves (operating on electrical components with wet hands may lead to a near certain danger of electrical shock):
DANGER:
DANGER:
ATTENTION:
is designed and built to be inserted in a refrigerating circuit that can be used in the field of industrial
can make use of the refrigerant gas specifically foreseen and indicated on its plate.
has been designed and built to work in environments that do not have a potentially explosive
PARTLY COMPLETED MACHINERY
for different operations or the use of a refrigerant gas different from the one indicated on
PARTLY COMPLETED MACHINERY
in case of a different intended use, it is essential to first consult the Technical Office of the Manufacturer.
the Manufacturer rejects any responsibility for possible damages to things and/or persons
stemming from improper interventions performed by unqualified, untrained, or unauthorized
personnel.
PARTLY COMPLETED MACHINERY
prevent that the
PARTLY COMPLETED MACHINERY
without surveillance: in fact, before starting to work, each operator must be perfectly
knowledgeable of the characteristics of the
read these instructions.
FULLY
, make sure that any condition dangerous to safety has been duly eliminated and
, make sure that all the guards or other protections are in their place and that all the
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
it is necessary to make sure that before starting any type of intervention on the
or near its components or accessory equipment, the power supply be cut-off; if this were
MACHINERY
not possible, it is necessary to take measures that, at any rate, allow operators to safely work near
the
PARTLY COMPLETED MACHINERY
unauthorized tampering with or replacement of one or more parts of the
the use of accessories, tools, and consumption materials different than those indicated by the Manufacturer
may cause danger of injury.
all the materials with an environmental impact which need to be eliminated following interventions or
processing on the
PARTLY COMPLETED MACHINERY
force.
If necessary, contact specialized waste collection centers for their disposal.
PARTLY COMPLETED MACHINERY
clean of pieces of plastic, oils, solvents, paper, and rags.
itself, and are therefore considered improper uses for
PARTLY COMPLETED MACHINERY
must be duly instructed on how to best use it risk-free, and must
be used by unauthorized or uninstructed personnel
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
, do not cover them for any reason, and immediately replace them if
.
PARTLY COMPLETED MACHINERY
must be knowledgeable of all the procedures
PARTLY COMPLETED MACHINERY
.
must be disposed of in accordance with the norms in
. To prevent the possibility of a fire
, we recommend that you diligently
; he must, moreover, have
.
must wear suitable clothing, avoiding or
.
PARTLY COMPLETED MACHINERY
RC-RCS Pag - 40 - REV 02 03/16
PARTLY COMPLETED
and
Publicité
